Material: made of polypropylene 59 µm / 54 g/m²
Printing: is often printed with white to get a perfect colour print.  
Adhesive: permanent adhesive
Properties: surface-coated, smooth, transparent, glossy, robust
Areas of application: particularly suitable for e. g. labelling of cosmetic products, product labels for chemicals, household cleaners or also glass and beverage cans (for all smooth surfaces). Suitable for all labels that should have a certain resistance to water, oils, liquids and chemicals. Excellent resistance to environmental influences.
Note: this film is not suitable for food contact applications.
Processing: suitable for mechanical and manual dispatching
min. Bonding temperature: from 0 °C
Application temperature: -30°C to +80°C (temporary up to +95°C*)

Further materials on request.
The respective manufacturers are responsible for changes in the properties of the materials.

Material: mother-of-pearl appearance, polypropylene approx. 60 µm / 45 g/m².
Adhesive: permanent adhesive
Characteristics: surface-coated, pearlescent, smooth, glossy, robust
Areas of application: particularly suitable for e. g. labelling of cosmetic products, chemical containers and household cleaners. But also for glass containers, beverage cans and crucibles (for all smooth surfaces). Suitable for all labels that should have a certain resistance to water, oils, liquids and chemicals. Excellent resistance to environmental influences.
Note: this film is not suitable for food contact applications.
Processing: suitable for mechanical and manual dispatching
min. Bonding temperature: from 0 °C
Application temperature: -30°C to +80°C (temporary up to +95°C*)

Further materials on request.
The respective manufacturers are responsible for changes in the properties of the materials.

Material: PEFC-certified paper
Adhesive: extra permanent adhesive
Characteristics: smooth, slightly glossy painted surface
Areas of application: suitable for various product labels such as shipping labels, food labels, stickers and bottle labels. But also for glass containers, beverage cans and crucibles (for all smooth surfaces). Suitable for all labels that are used indoors or for a short period of outdoor use. Not resistant to water, oils, liquids and chemicals.
Note: this material is suitable for applications that have direct contact with dry and non-fatty foodstuffs.
Processing: suitable for mechanical and manual dispatching
min. Bonding temperature: from -10 °C onwards
Application temperature: -30°C to +80°C (temporary up to 200°C hot fixation)

Further materials on request.
The respective manufacturers are responsible for changes in the properties of the materials.

Material: PEFC-certified paper
Adhesive: removable
Characteristics: smooth, slightly glossy painted surface
Areas of application: suitable for a wide range of product labels where the label has to be removed again with good initial adhesion, e. g. cartons, PE-foils, steel, glass as well as for all smooth surfaces. For indoor use. Not resistant to water, oils, liquids and chemicals.
Note: this material is not suitable for food contact applications.
Processing: suitable for mechanical and manual dispatching
min. Bonding temperature: from -25 °C onwards
Application temperature: -40°C to +60°C (temporary up to 200°C hot fixation)

Further materials on request.
The respective manufacturers are responsible for changes in the properties of the materials.

Material: FSC-certified paper with dark backside coating
Adhesive: permanent adhesive
Characteristics: smooth, slightly glossy painted surface with high opacity
Areas of application: suitable for opaque labelling, such as gluing over existing articles and packaging, e. g. in the food industry. For indoor use or for short outdoor use. Not resistant to water, oils, liquids and chemicals.
Note: this material is suitable for applications that have direct contact with dry and non-fatty foodstuffs.
Processing: suitable for mechanical and manual dispatching
min. Bonding temperature: from -10 °C onwards
Application temperature: -30°C to +80°C (temporary up to 200°C hot fixation)

Further materials on request.
The respective manufacturers are responsible for changes in the properties of the materials.

Material: natural paper
Adhesive: permanent adhesive
Properties: natural white, uncoated, textured surface, wet-strength and fungicide treated
Areas of Application: specially developed for the labelling of wine bottles. Also suitable for lightly moist and cold glass. No mildew on the label during longer storage times.
Indoor use and deposits with climatic changes. Good resistance even in ice buckets. Not resistant to oils and chemicals.
Note: this material is not suitable for food contact applications.
Processing: suitable for mechanical and manual dispatching
min. Bonding temperature: from +5 °C onwards
Application temperature: -25°C to +70°C

Further materials on request.
The respective manufacturers are responsible for changes in the properties of the materials.

Material: FSC-certified paper
Adhesive: permanent adhesion, even on rough surfaces
Colours: flour red, flour yellow, flour green
Properties: matt surface
Areas of application: particularly suitable for eye-catching labels such as price and hazard labelling. Suitable for all labels that are used indoors or for a short period of outdoor use. Not resistant to water, oils, liquids and chemicals.
Note: this material is not suitable for food contact applications.
Processing: suitable for mechanical and manual dispatching
min. Bonding temperature: from 0 °C
Application temperature: -30°C to +80°C

Further materials on request.
The respective manufacturers are responsible for changes in the properties of the materials.

Certification: biodegradable film according to European standard EN13432. Also complies with the European Food Regulation 1935/2004/EC for direct contact with dry, non-greasy foodstuffs.
Material: 45 µm/65g/m², white, high-gloss film made of wood pulp - originating from controlled plantations - the material is biodegradable and compostable.
Printing: with food-safe colours
Adhesive: permanently adhesive on acrylate basis, biodegradable and compostable, vegan
Properties: surface-coated, smooth, glossy, biodegradable and compostable, good resistance to oils and greases.
Areas of application: particularly suitable for labelling foodstuffs, organic products and environmental packaging. Especially for applications where the complete packaging has to be biodegradable and where direct food contact is required.
Note: Due to the cellulose basis, film reacts to environmental influences such as humidity and temperature fluctuations. Caution for long-term use in humid environments, we recommend prior testing under operating conditions.
Processing: suitable for mechanical and manual dispatching
Remark: min. bonding temperature: 5 °C
Application temperature: -20°C to +80°C

Further materials on request.
The respective manufacturers are responsible for changes in the properties of the materials.

Certification: biodegradable film according to European standard EN13432.
Also complies with the European Food Regulation 1935/2004/EC for direct contact with dry, non-greasy foodstuffs.
Material: 45 µm/64g/m², transparent, high-gloss film made of wood pulp - originating from controlled plantations - the material is biodegradable and compostable.
Printing: is often printed with white (food safe colour) to get a perfect colour print.  
Adhesive: permanently adhesive on acrylate basis, biodegradable and compostable, vegan
Properties: surface-coated, smooth, glossy, biodegradable and compostable, good resistance to oils and greases.
Areas of application: particularly suitable for labelling foodstuffs, organic products and environmental packaging. Especially for applications where the complete packaging has to be biodegradable and where direct food contact is required.
Note: Due to the cellulose basis, film reacts to environmental influences such as humidity and temperature fluctuations. Caution for long-term use in humid environments, we recommend prior testing under operating conditions.
Processing: suitable for mechanical and manual dispatching
Remark: min. bonding temperature: 5 °C
Application temperature: -20°C to +80°C

Further materials on request.
The respective manufacturers are responsible for changes in the properties of the materials.

Certification: FSC®, in accordance with Regulation (EC) No. 1935/2004 of the European Parliament, the LFBG and recommended by BfR XIV (Institute for Risk Assessment) on food contact materials and the US Food and Drug Administration FDA 21 CFR 175.105,
Material: Carrier material FSC® Recycled kraft paper, upper material FSC®from 100% post-consumer waste without chlorine bleach, colour natural white
Adhesive: permanent adhesive
Characteristics: smooth, slightly painted matt surface
Areas of application: suitable for various product labels such as food labels, organic products, cosmetics, bottle labels, environmental packaging. But also for all smooth surfaces. For all labels that are used indoors or for a short period of outdoor use. Only limited resistance to water, oils, liquids and chemicals.
Note: this material is suitable for applications that have direct contact with dry and non-fatty foodstuffs.
Processing: suitable for mechanical and manual dispatching
min. Bonding temperature: from -0 °C
Application temperature: -20°C to +80°C

Further materials on request.
The respective manufacturers are responsible for changes in the properties of the materials.

Certification: according to US Food and Drug Administration FDA 21 CFR 175.105,
Material: Wash-Off white natural label paper, wet-strength version.  
Adhesive: water soluble
Properties: matt surface, high strength, high climate stability, good adhesion on damp and cold surfaces.
Field of application: particularly suitable for applications in the beverage industry and reusable transport containers of all kinds. For all applications where the label must be removed without leaving any residue.
Note: The material has good water solubility. In a lye bath at 70 degrees Celsius, the label detaches from the glass bottle after approx. 30 seconds. There is no razor burn. The label is retained in one piece. Alkalinity and increased water temperature accelerate the dissolving process. Suitable for indirect contact with dry and non-fatty foodstuffs.
Processing: suitable for mechanical and manual dispatching
Bonding temperature: from +5°C to +40°C
Application temperature: -15°C to +80°C

Further materials on request.
The respective manufacturers are responsible for changes in the properties of the materials.

Certification: FSC®, BfR (Federal Institute for Risk Assessment) and FDA (US Food and Drug Administration)175.105 approved
Material: carrier material made of siliconized glassine on one side, upper material made of grass, colour green-yellow
Adhesive: permanent adhesive
Characteristics: smoky, very haptic, grained surface
Areas of application: suitable for various product labels such as food labels, organic products, cosmetics, bottle labels, environmental packaging. But also for all smooth surfaces. For all labels used indoors. Only limited resistance to water, liquid and chemicals.
Note: this material is suitable for applications that have direct contact with dry and non-fatty foodstuffs.
Processing: suitable for mechanical and manual dispatching
min. Bonding temperature: from +5 °C onwards
Application temperature: -40°C to + 170°C

Further materials on request.
The respective manufacturers are responsible for changes in the properties of the materials.

Material: up to 80% stone meal and non-toxic synthetic resin Polyethylene
Adhesive: permanent
Particularly environment-friendly: production without water, bleach or acid, no cellulose is needed - no tree has to be felled!
Characteristics: hardly inflammable, tear-resistant, water-repellent, velvety surface, cream-coloured
Field of application: suitable for various product labels such as food labels, organic products, cosmetics, bottle labels, environmental packaging. But also for all smooth surfaces.
Processing: suitable for mechanical and manual dispatching
Bonding temperature: from +5°C to +40°C
Application temperature: -15°C to +80°C

Further materials on request.
The respective manufacturers are responsible for changes in the properties of the materials.

Thanks to our digital printing technology and laser cutting machines it is possible to produce almost any desired shape. There are no limits to your creativity when designing your labels. Whether oval, round, rectangular, square or figurative - almost everything is possible!

Or do you need several different shapes one after the other on a carrier track? No problem either.

Our production lines offer you an infinite number of possibilities that would be inconceivable in conventional printing. We would be happy to provide you with further information.

Our innovative production lines can also produce XXL-Jumbo Labels. Where conventional printing and its processing systems are limited to certain formats, we are just beginning.

There are no limits due to the digital roll printing with a web width of 50 cm and the processing with laser cutting machines in the same XXL web width. This is the basis of our motto - "Lots, lots, every size, every shape"! The possibilities and format variants seem almost endless.

We will be happy to answer your questions about possible formats and designs. We are looking forward to your call.

Press proof - edition 1

Do you need an original printout to coordinate with your marketing department or to approve the main print run? Or would you simply like to see in advance what your newly designed label looks like? We are also happy to offer you this option.
Your label in edition of 1 piece with or without die-cutting!

Our production lines offer you an infinite number of possibilities that would be inconceivable in conventional printing. We would be happy to provide you with further information. Talk to us about it.

Digital printing technology is used to produce labels in a wide variety of shapes and sizes in varying editions. Conventional die-cutting of labels slows down the rational workflow.

As a solution for this, Mail Druck + Medien GmbH developed and patented a laser cutting system for the finishing of roll adhesive labels in 2007.

Laser cutting has been in use for a long time in the metal industry, but for cutting paper it is not very well known and hardly used at all. This technique has only received a little more attention in recent years. Our fully automated production lines are the result of ten years of experience with laser cutting systems.

Today, any type and quantity of self-adhesive roll labels can be produced in high quality in the shortest possible time. There is also no need to produce printing forms and expensive punching tools and die plates. A cost saving which we gladly pass on to our customers.